FAQ's

To operate a cleaning laser, you need electricity: 0.4 kW (50W) to 7 kW (1000W). Furthermore, some cleaning lasers use compressed air. Lastly, there is a yearly fee for the P-Laser software, Cleansweep.

P-Laser Low and Mid Power Machines work with 110-220V, High Power Lasers require 380-440V.

All systems can be automated or mounted on a robot.

Low Power P-Lasers are air-cooled, and don’t require a lot of maintenance. However, it is important to keep the lens and filters clean at all time. Mid and High-Power P-Lasers are water cooled, and require check of filters and chillers every month. Keep the lens clean at all time. We recommend a yearly check-up of your system by P-Laser staff. We also offer a remote monitoring service, with which P-Laser staff can check alarms, temperatures, humidity etc. as a proactive tool.

Yes, our offers include training course for every customer. The training includes a safety course and training on how to operate the laser and how to use the software.

Laser cleaning is a safe cleaning method, but the radiation is dangerous for the eyes. Always use appropriate laser goggles when the machine is active.

Yes, we have some installations that have been running 24/7 for years.

The laser beam can go up to 20cm wide (focal length 400mm). However, this is not the most important aspect of the laser beam. An essential element for our lasers is the Cleansweep software, which allows you to change the frequency, intensity, shape and size of the laser beam. The combination of these variables offers efficient configurations for different applications.

The laser beam can go up to 20cm wide (focal length 400mm). However, this is not the most important aspect of the laser beam. An essential element for our lasers is the Cleansweep software, which allows you to change the frequency, intensity, shape and size of the laser beam. The combination of these variables offers efficient configurations for different applications.

The laser beam can go up to 20cm wide (focal length 400mm). However, this is not the most important aspect of the laser beam. An essential element for our lasers is the Cleansweep software, which allows you to change the frequency, intensity, shape and size of the laser beam. The combination of these variables offers efficient configurations for different applications.